It is currently Thu Mar 28, 2024 5:57 am

All times are UTC - 5 hours [ DST ]




  Page 1 of 1   [ 19 posts ] New Topic Add Reply
Author Message
 Post subject: My first build
PostPosted: Tue May 29, 2018 8:41 pm • # 1 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
I bought a Custom kit 7'6" 1wt today and was wondering what else I'll need and where to get it . It comes with dual foot snake eyes, reel seat and cork grip What kind of wrapping thread (silk) or otherwise . Any help or ideas are welcome .
TIA
jangles


Top
  
 Post subject: Re: My first build
PostPosted: Thu May 31, 2018 1:42 am • # 2 
User avatar
Hero Member

Joined: 06/13/16
Posts: 936
Location: Southwest Florida
Proof fly fishing offers a great selection of silk thread.

You'll also need:

-Masking tape. I use 1/4" to build reel seat arbors. 1/8" to tape guides to blank before wrapping.

-Epoxy for installing reel seat and grip. I use Flex Coat rod builder's epoxy.

-Finish. Flex Coat lite is excellent. Pick up the syringes as well, as you need a 50/50 mix in order for it to cure properly. I buy the mixing cups offered.

-Tip top adhesive. I use Bohning Ferr L Tite, but only because I could buy it from a local store. You'll also need a lighter to melt this.

-Brushes for applying epoxy and finish.

Best tip I ever received was to not throw the finish away after coating the threads. You use that to check to see if it's dry instead of touching the wraps. If the finish is still tacky, you'll leave a finger print on the rod!


Top
  
 Post subject: Re: My first build
PostPosted: Thu May 31, 2018 9:53 am • # 3 
User avatar
Hero Member

Joined: 01/26/09
Posts: 617
Location: Oklahoma
I might add that most beginners prefer using nylon size A thread for the wraps. Also instead of epoxy, many use spar varnish for the wraps, but the thing to remember about spar varnish is it dries with a light amber color. However, spar varnish is very easy to use. Some masking tape leaves a residue on the surface, so I would recommend the blue masking tape which does not leave a residue behind.

Larry


Top
  
 Post subject: Re: My first build
PostPosted: Thu May 31, 2018 1:09 pm • # 4 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
Thank you for your replies . I am looking at a starter kit from Mud Hole . It seems to have everything I need but would like your opinions .
http://www.mudhole.com/Ultimate-eZ-Rod- ... quantity=1

If you think it will work I will order it asap .
Thank you and have a great day .


Top
  
 Post subject: Re: My first build
PostPosted: Thu May 31, 2018 7:13 pm • # 5 
User avatar
Hero Member

Joined: 01/26/09
Posts: 617
Location: Oklahoma
Looks like it has pretty much everything you need to get started.

Larry


Top
  
 Post subject: Re: My first build
PostPosted: Thu May 31, 2018 7:24 pm • # 6 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
Canoeman1947 wrote:
Looks like it has pretty much everything you need to get started.

Larry



Yes , I called a rod builder and asked his advice also . He said the same thing . I'm going for it as I want to build an O next . I have watched so many rod building videos and I am certain that I can do this as I recover from a triple bypass I had 4 weeks ago . What good therapy !!

Thanks for your input .
Ron


Top
  
 Post subject: Re: My first build
PostPosted: Sun Jun 03, 2018 10:50 am • # 7 
User avatar
Hero Member

Joined: 06/13/16
Posts: 936
Location: Southwest Florida
Wow! Glad to hear you are recovering.

You'll be amazed with how simple the process is. Post pics!


Top
  
 Post subject: Re: My first build
PostPosted: Sun Jun 03, 2018 3:24 pm • # 8 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
I will and thank you for the kind words .


Top
  
 Post subject: Re: My first build
PostPosted: Thu Jun 21, 2018 10:03 pm • # 9 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
Well it didn't go too well so I boxed it all up and stuffed it in the garage .


Top
  
 Post subject: Re: My first build
PostPosted: Fri Jun 22, 2018 10:22 pm • # 10 
User avatar
Hero Member

Joined: 08/27/15
Posts: 781
Location: New Jersey
jangles wrote:
Well it didn't go too well so I boxed it all up and stuffed it in the garage .


Bummer. Don’t get too down on yourself. There’s always a learning curve with DIY projects. The next will go better.


Top
  
 Post subject: Re: My first build
PostPosted: Sat Jun 23, 2018 2:51 am • # 11 
User avatar
Hero Member

Joined: 06/13/16
Posts: 936
Location: Southwest Florida
jangles wrote:
Well it didn't go too well so I boxed it all up and stuffed it in the garage .


What happened?

Go retrieve it. I'm telling you, it raises the experience one level when you've caught it on a rod you built!

Don't give up.


Top
  
 Post subject: Re: My first build
PostPosted: Sat Jun 23, 2018 1:40 pm • # 12 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
Delete.....


Last edited by jangles on Wed Jul 11, 2018 1:40 pm, edited 1 time in total.

Top
  
 Post subject: Re: My first build
PostPosted: Wed Jul 11, 2018 1:39 pm • # 13 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
Well I finished it . One I learned the locking x wrap the build went pretty smooth except for one little problem . When I applied the epoxy the Tiger wrap went almost black and cant see it at all . The red metallic I used can be seen but looks very deep . I'm not sure what happened . I ordered a 7'6" Owt from Mark at RDP for my next build .

Anyway I'm looking forward to using it in Aug on my upcoming trip .


Image

Image


Top
  
 Post subject: Re: My first build
PostPosted: Wed Jul 11, 2018 4:37 pm • # 14 
User avatar
Hero Member

Joined: 07/10/09
Posts: 1555
Location: Plano Texas
Satisfaction when the job is completed. We'll done, will be sweeter on the first fish.


Top
  
 Post subject: Re: My first build
PostPosted: Fri Jul 13, 2018 9:17 am • # 15 
User avatar
Full Member

Joined: 06/28/18
Posts: 121
Location: Cornelius, NC
Thanks for sharing this with us.


Top
  
 Post subject: Re: My first build
PostPosted: Mon Jul 16, 2018 5:21 pm • # 16 
User avatar
Hero Member

Joined: 06/13/16
Posts: 936
Location: Southwest Florida
You have to use color preserver on the wraps before you apply the finish.

Looks good! Can't wait to see pics of the first fish


Top
  
 Post subject: Re: My first build
PostPosted: Mon Jul 16, 2018 5:34 pm • # 17 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
strummer wrote:
You have to use color preserver on the wraps before you apply the finish.

Looks good! Can't wait to see pics of the first fish


I used color fast nylon on everything , well everything but the Tiger . I just assumed but you know what that does .

I'm waiting on my RDP 7'6" O wt to get here so can get a start on it before I leave for Montana . After that one I'm building a jet black 7'6" 2wt for a friend as a gift . I love doing this man it's a ball and my old back and knees can take the sitting down !


Top
  
 Post subject: Re: My first build
PostPosted: Tue Jul 17, 2018 12:36 pm • # 18 
User avatar
Hero Member

Joined: 06/13/16
Posts: 936
Location: Southwest Florida
Yeah. It's addicting!

That 0wt sounds like fun!


Top
  
 Post subject: Re: My first build
PostPosted: Tue Jul 17, 2018 4:14 pm • # 19 
User avatar
Hero Member

Joined: 05/28/18
Posts: 603
Location: Tucson , Hellazonia
strummer wrote:
Yeah. It's addicting!

That 0wt sounds like fun!


I got it yesterday so I'm thinking of a creekside build !


Top
  
Display posts from previous:  Sort by  

  Page 1 of 1   [ 19 posts ] New Topic Add Reply

All times are UTC - 5 hours [ DST ]



Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron


- OurBoard Support -