It is currently Thu Jan 20, 2022 2:04 am

All times are UTC - 5 hours [ DST ]




  Page 1 of 1   [ 5 posts ] New Topic Add Reply
Author Message
 Post subject: Bergman's Fly Floatant
PostPosted: Fri Nov 16, 2012 2:53 pm • # 1 
User avatar
Full Member

Joined: 09/17/12
Posts: 141
Location: Washington State
I did a couple of ULFF searches for "Bergman" and "floatant" and didn't get any results on Ray Bergman's floatant recipe from his great book, Trout. I've tried his recipe and for a few pennies' worth of paraffin dissolved in the remnant of a can of Coleman fuel, I have enough floatant to last years. After dipping a fly into the solution contained in a small wide-mouthed bottle with a leak-proof cap and shaking, then shaking the excess solution off the fly using the VERY effective rubber band fly dryer I found in this The Frugal Fly Fisherman forum, it floats like a cork; better than any floatant I've ever used.

Here is a link to an article referencing Bergman's floatant recipe in the book showing a test comparison with commercially available products
http://www.drlogik.com/flyfloatants.html
2 ounces of paraffin dissolved in 1 pint of non-leaded gas

However I have found two *three* disadvantages to this floatant recipe.

The first is it congeals below 60° fahrenheit. So you can either carry it in a tightly sealed bottle inside a shirt or jacket pocket or I've heard that a little less paraffin in the mix will help.

The second disadvantage is it's an extremely flammable mixture. Smoking a pipe, cigars, or cigarettes... :hat when treating your fly would be a bad idea, but I'm a non-smoker.

*The third disadvantage is I have not been able to find a larger jar to mix and store a batch of floatant or a small bottle to carry with me that seal well enough to keep the Coleman white gas from evaporating for longer than just a couple of weeks.*


Last edited by Brian_Miller on Sun Dec 12, 2021 11:45 pm, edited 2 times in total.

Top
  
PostPosted: Fri Nov 16, 2012 4:36 pm • # 2 
User avatar
Hero Member

Joined: 02/27/12
Posts: 1956
Location: Chicopee, MA
That is very close to what my dad used to mix up for us when I was a kid. He would shave Gulf Wax

Image

(paraffin wax) that my mom used in canning into carbon tetrachloride that you could buy over the counter at the drug store, it was banned from consumer products in the US in 1970.. The carbon tet would evaporate and leave the wax film same as Bergman’s formula except it would not ignite while smoking and did not have the smell. I would think an industrial acetone today would be close t the same.


Top
  
PostPosted: Fri Nov 16, 2012 4:53 pm • # 3 
User avatar
Hero Member

Joined: 08/02/09
Posts: 734
Thanks for posting that Brian.

---David


Top
  
PostPosted: Fri Nov 16, 2012 11:44 pm • # 4 
User avatar
Full Member

Joined: 07/22/11
Posts: 177
What I use.
https://i1236.photobucket.com/albums/ff4 ... dryfly.jpg[/IMG]

Love it, and yes, if the kindling is a bit damp......


Top
  
PostPosted: Sun Dec 12, 2021 2:50 pm • # 5 
User avatar
Newbie

Joined: 11/19/21
Posts: 11
Hi folks,

"un-leaded gas" isn't a good idea. It smells. I prefer Coleman fuel or straight VMP Naptha (basically Coleman fuel without the anti-rust and other additives). VMP Naptha is gin clear also. In the old days they called this stuff "White gas". Once evaporated, it doesn't leave a discernible smell.

In recent years I have cut back on the amount of paraffin I use so that I can have one formula for both winter and warmer seasons.


Top
  
Display posts from previous:  Sort by  

  Page 1 of 1   [ 5 posts ] New Topic Add Reply

All times are UTC - 5 hours [ DST ]



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

- OurBoard Support -